{"title":"JL Audio","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/JL_Audio_Logo.png?v=1753331329\" alt=\"\"\u003e\u003c\/p\u003e","products":[{"product_id":"jl-audio-max-kit-audio-measurement-system","title":"Jl Audio Max-Kit Audio Measurement System","description":"MAX Audio Measurement System\u003cbr\u003e\u003cbr\u003eMAX™ is a professional-grade, dual FFT measurement system with five microphones. It is ideal for general audio system measurements, system tuning with DSP, troubleshooting and testing equipment, and solving OEM integration challenges. MAX™ has many applications in home audio, car audio, marine audio and professional audio.\u003cbr\u003e\u003cbr\u003eWith full integration of VXi and MVi DSP controls, MAX™ simplifies your measurement setup, allowing you to perform measurements and DSP adjustments with one computer and one software application: TüN® 4.0, which offers micro-automations that speed up equalization and channel delay setting.\u003cbr\u003e\u003cbr\u003e?What can you do with MAX™?\u003cbr\u003e\u003cbr\u003eTest, troubleshoot and analyze any audio system with full detail on the three dimensions of audio: level, frequency and time… all in real time!\u003cbr\u003eStreamline the tuning of car audio DSP products in real-world shop environments. Simply connect the hardware, place the microphone array, launch TüN® software and go!\u003cbr\u003eQuickly test room modes for home audio and home theater subwoofer placements, and accurately adjust crossover and phase controls for a seamless transition to the subwoofer.?\u003cbr\u003eEvaluate individual or multiple audio zones in a marine installation for frequency response and level.?\u003cbr\u003eGet the best measurements possible with 5-microphone averaging! MAX™ multiplexes up to five included microphones to conduct single FFT measurements of level and frequency response (RTA and spectrograph).?\u003cbr\u003eConduct Dual FFT measurements of up to five simultaneous transfer functions with precise displays of magnitude (frequency response), phase, impulse response (delay) and coherence (noise immunity).?\u003cbr\u003eEach transfer function captures all the audio data for real-time or comparative analysis.?\u003cbr\u003eBuilt-in Test Signal Generator (pink and white noise, sine waves, square waves, etc.), plus WAV file playback capability.\u003cbr\u003ePowerful Automations with VXi and MVi amplifiers:\u003cbr\u003e\u003cbr\u003eAutomatic True Delay feature sets VXi\/MVi channel delays in a flash, far more accurately than any other method.\u003cbr\u003eAutoset EQ feature sets the VXi\/MVi parametric EQ’s to your selected target, in seconds. You can also overlay VXi\/MVi equalizer controls over the frequency response display to perform precise, manual EQ adjustments with real time visual feedback.\u003cbr\u003eMAX is Incredibly Flexible and Accurate!\u003cbr\u003e\u003cbr\u003eMAX™ measurement accuracy is on par with professional test equipment that sells for tens of thousands of dollars.?\u003cbr\u003eWide Range of Inputs (up to five microphones, high-level analog signals up to 80V, low-level analog signals up to 7V, optical digital S\/PDIF signals)?\u003cbr\u003eMultiple Signal Outputs (built-in DAC feeding analog line level outputs and headphone outputs, plus optical digital output)?\u003cbr\u003eA built-in USB Hub simplifies connection to computer and DSP amplifiers, or other USB devices (not intended for charging devices).?\u003cbr\u003eWhat is in the Kit?\u003cbr\u003e\u003cbr\u003eThe MAX-KIT includes the MAX™ hardware interface, ?five measurement microphones, a multi-mic fixture, mounting accessories, cables and power supplies, all packed in a locking, waterproof hard case.?\u003cbr\u003eAn optional, specialized probe kit for speaker impedance and high-voltage electrical measurements is available separately: “MAX-PROBE KIT” (90922)?\u003cbr\u003eWhat else will you need:\u003cbr\u003e\u003cbr\u003eA PC (Windows 10), or Mac (OS 11 Big Sur or newer)?\u003cbr\u003eOur free TüN® 4 software, available below ?\u003cbr\u003eA mic stand or tripod to support the multi-mic holder.","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412608159862,"sku":"010-03028-00","price":6712.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03028-00_TJNWMV9ZDL3T.jpg?v=1757310754"},{"product_id":"jl-audio-m3-650x-c-gw-65-marine-coaxial-speakers-gloss-white-classic-grille","title":"Jl Audio M3-650X-C-Gw 6.5\" Marine Coaxial Speakers Gloss White Classic Grille","description":"M3 Standard Flange 6.5-inch Marine Coaxial System (60 W, 4 O) - Gloss White Classic Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern. \u003cbr\u003e\u003cbr\u003eThe long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t60 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 120 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609273974,"sku":"010-03060-00","price":352.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03060-00_TJNWNK9ELAWB.jpg?v=1757310766"},{"product_id":"jl-audio-m3-650x-s-gm-65-marine-coaxial-speakers-gray-metallic-sport-grille","title":"Jl Audio M3-650X-S-Gm 6.5\" Marine Coaxial Speakers Gray Metallic Sport Grille","description":"\u003cp\u003eM3 Standard Flange 6.5-inch Marine Coaxial System (60 W, 4 O) - Gray Metallic Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern. \u003cbr\u003e\u003cbr\u003eThe long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS) 60 W\u003cbr\u003eRecommended Amplifier Power (RMS) 20 - 120 W \/ Ch.\u003cbr\u003eSystem Efficiency 89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance 4 O\u003cbr\u003eSystem Frequency Response 55 Hz - 25 KHz ± 3 dB\u003c\/p\u003e","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609306742,"sku":"010-03061-00","price":352.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03061-00_TJNWNOV6RAM3.jpg?v=1757310769"},{"product_id":"jl-audio-m3-650x-s-gw-65-marine-coaxial-speakers-gloss-white-sport-grille","title":"Jl Audio M3-650X-S-Gw 6.5\" Marine Coaxial Speakers Gloss White Sport Grille","description":"M3 Standard Flange 6.5-inch Marine Coaxial System (60 W, 4 O) - Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern. \u003cbr\u003e\u003cbr\u003eThe long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t60 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 120 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609339510,"sku":"010-03063-00","price":352.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03063-00_TJNWNWBDQS0G.jpg?v=1757310771"},{"product_id":"jl-audio-m3-770x-c-gw-77-marine-coaxial-speakers-gloss-white-classic-grille","title":"Jl Audio M3-770X-C-Gw 7.7\" Marine Coaxial Speakers Gloss White Classic Grille","description":"M3 7.7-inch Marine Coaxial Speakers (70 W, 4 O) - Gloss White Classic Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.\u003cbr\u003e\u003cbr\u003eThe woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t70 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 140 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609405046,"sku":"010-03065-00","price":499.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03065-00_TJNWO2ZMTC6U.jpg?v=1757310774"},{"product_id":"jl-audio-m3-770x-s-gm-77-marine-coaxial-speakers-gray-metallic-sport-grille","title":"Jl Audio M3-770X-S-Gm 7.7\" Marine Coaxial Speakers Gray Metallic Sport Grille","description":"M3 7.7-inch Marine Coaxial Speakers (70 W, 4 O) - Gray Metallic Sport Classic Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.\u003cbr\u003e\u003cbr\u003eThe woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t70 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 140 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609437814,"sku":"010-03066-00","price":499.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03066-00_TJNWO7EGRQ0T.jpg?v=1757310776"},{"product_id":"jl-audio-m3-770x-s-gw-77-marine-coaxial-speakers-gloss-white-sport-grille","title":"Jl Audio M3-770X-S-Gw 7.7\" Marine Coaxial Speakers Gloss White Sport Grille","description":"M3 7.7-inch Marine Coaxial Speakers (70 W, 4 O) - Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.\u003cbr\u003e\u003cbr\u003eThe woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eAlthough M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t70 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 140 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412609634422,"sku":"010-03068-00","price":499.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03068-00_TJNWODK07TCD.jpg?v=1757310778"},{"product_id":"jl-audio-m3-10ib-c-gw-4-10-marine-subwooder-driver-gloss-white-classic-grille","title":"Jl Audio M3-10Ib-C-Gw-4 10\" Marine Subwooder Driver Gloss White Classic Grille","description":"M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 O) - Gloss White Classic Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.\u003cbr\u003e\u003cbr\u003eThe M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t175 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412610388086,"sku":"010-03070-00","price":382.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03070-00_TJNWOJFMW798.jpg?v=1757310780"},{"product_id":"jl-audio-m3-10ib-s-gm-4-10-marine-subwooder-driver-gray-metallic-sport-grille","title":"Jl Audio M3-10Ib-S-Gm-4 10\" Marine Subwooder Driver Gray Metallic Sport Grille","description":"M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 O) - Gray Metallic Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.\u003cbr\u003e\u003cbr\u003eThe M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t175 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412612616310,"sku":"010-03071-00","price":382.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03071-00_TJNWONXQKHFB.jpg?v=1757310783"},{"product_id":"jl-audio-m3-10ib-s-gw-4-10-marine-subwooder-driver-gloss-white-sport-grille","title":"Jl Audio M3-10Ib-S-Gw-4 10\" Marine Subwooder Driver Gloss White Sport Grille","description":"M3 10-inch Marine Subwoofer for Infinite-Baffle Use (175 W, 4 O) - Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M3 infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications.\u003cbr\u003e\u003cbr\u003eThe M3-10 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of this model takes place in JL Audio's Miramar, Florida factory, using global materials and components.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t175 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412613730422,"sku":"010-03072-00","price":382.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03072-00_TJNWOSCLAIY9.jpg?v=1757310785"},{"product_id":"jl-audio-m6-880x-s-gwgw-88-marine-coaxial-speakers-gloss-white-sport-grille","title":"Jl Audio M6-880X-S-Gwgw 8.8\" Marine Coaxial Speakers Gloss White Sport Grille","description":"M6 8.8-inch Marine Coaxial Speakers (125 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.\u003cbr\u003e\u003cbr\u003eThese 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.\u003cbr\u003e\u003cbr\u003eTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t125 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t50 - 250 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t38 Hz - 20 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412616515702,"sku":"010-03078-00","price":921.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03078-00_TJNWPGBVJJS4.jpg?v=1757310799"},{"product_id":"jl-audio-m6-880x-s-gmti-88-marine-coaxial-speakers-gray-titanium-sport-grille","title":"Jl Audio M6-880X-S-Gmti 8.8\" Marine Coaxial Speakers Gray Titanium Sport Grille","description":"M6 8.8-inch Marine Coaxial Speakers (125 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.\u003cbr\u003e\u003cbr\u003eThese 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.\u003cbr\u003e\u003cbr\u003eTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A high-quality, true 2-way crossover network precisely filters and balances the coaxial system for outstanding fidelity.\u003cbr\u003e\u003cbr\u003eAlthough M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t125 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t50 - 250 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t38 Hz - 20 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412616548470,"sku":"010-03079-00","price":921.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03079-00_TJNWPM6WY483.jpg?v=1757310802"},{"product_id":"jl-audio-m6-10ib-c-gwgw-4-10-marine-subwooder-driver-gloss-white-classic-grille","title":"Jl Audio M6-10Ib-C-Gwgw-4 10\" Marine Subwooder Driver Gloss White Classic Grille","description":"M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 O) - Gloss White Trim Ring, Gloss White Classic Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.\u003cbr\u003e\u003cbr\u003eThe M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t250 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412616614006,"sku":"010-03083-00","price":568.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03083-00_TJNWPXG6S9WV.jpg?v=1757310806"},{"product_id":"jl-audio-m6-10ib-s-gwgw-4-10-marine-subwooder-driver-gloss-white-sport-grille","title":"Jl Audio M6-10Ib-S-Gwgw-4 10\" Marine Subwooder Driver Gloss White Sport Grille","description":"M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.\u003cbr\u003e\u003cbr\u003eThe M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t250 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412616777846,"sku":"010-03084-00","price":568.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03084-00_TJNWQ4QZ3P1G.jpg?v=1757310811"},{"product_id":"jl-audio-m6-650x-s-gmti-65-marine-coaxial-speakers-gray-titanium-sport-grille","title":"Jl Audio M6-650X-S-Gmti 6.5\" Marine Coaxial Speakers Gray Titanium Sport Grille","description":"\u003cp\u003eM6 6.5-inch Marine Coaxial Speakers (75 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.\u003cbr\u003e\u003cbr\u003eA DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.\u003cbr\u003e\u003cbr\u003eA 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS) 75 W\u003cbr\u003eRecommended Amplifier Power (RMS) 25 - 150 W \/ Ch.\u003cbr\u003eSystem Efficiency 89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance 4 O\u003cbr\u003eSystem Frequency Response 55 Hz - 25 KHz ± 3 dB\u003c\/p\u003e","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412619235446,"sku":"010-03091-00","price":578.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03091-00_TJNWQPKP3VIR.jpg?v=1757310818"},{"product_id":"jl-audio-m6-770x-c-gwgw-77-marine-coaxial-speakers-white-with-black-mesh","title":"Jl Audio M6-770X-C-Gwgw 7.7\" Marine Coaxial Speakers White With Black Mesh","description":"M6 7.7-inch Marine Coaxial Speakers (100 W, 4 O) - Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter Mesh\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.\u003cbr\u003e\u003cbr\u003eA 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t100 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t40 - 200 W \/ Ch.\u003cbr\u003eSystem Efficiency\t91.0 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412619268214,"sku":"010-03094-00","price":783.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03094-00_TJNWR0NEVBS5.jpg?v=1757310822"},{"product_id":"jl-audio-m6-880x-s-gwgw-88-marine-coaxial-speakers-white-sport-grille-with-led","title":"Jl Audio M6-880X-S-Gwgw 8.8\" Marine Coaxial Speakers White Sport Grille With Led","description":"M6 8.8-inch Marine Coaxial Speakers (125 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.\u003cbr\u003e\u003cbr\u003eThese 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.\u003cbr\u003e\u003cbr\u003eTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t125 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t50 - 250 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t38 Hz - 20 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621037686,"sku":"010-03095-00","price":1048.55,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03095-00_TJNWR55806PS.jpg?v=1757310824"},{"product_id":"jl-audio-mhd9005-5-channel-marine-amplifier-900-watts","title":"Jl Audio Mhd900\/5 5 Channel Marine Amplifier 900 Watts","description":"5-Channel Class D Marine System Amplifier, 100 W x 4 + 500 W x 1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThanks to its ability to act as a \"one-box solution\", the MHD900\/5 is ideal for installations where space is at a premium and sound quality is the paramount goal.\u003cbr\u003e\u003cbr\u003eWhile extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!\u003cbr\u003e\u003cbr\u003eUsing our Single Cycle Control switching design and R.I.P.S technology, the MHD900\/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.\u003cbr\u003e\u003cbr\u003eThis marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003eMain Channels @ 4 O\t               100 W RMS x 4\u003cbr\u003eMain Channels @ 3 O\t                75 W RMS x 4\u003cbr\u003eMain Channels @ 2 O\t                75 W RMS x 4\u003cbr\u003eMain Channels @ 1.5 O\t                75 W RMS x 4\u003cbr\u003eMain Channels - Bridged @ 8 Ohm\t200 W RMS x 2\u003cbr\u003eMain Channels - Bridged @ 4 Ohm\t150 W RMS x 2\u003cbr\u003eSubwoofer Channel @ 4 Ohm\t                500 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 3 Ohm                 500 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 2 Ohm \t500 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 1.5 Ohm\t500 W RMS x 1\u003cbr\u003e\u003cbr\u003eLineart Top-View and Side-View of MHD900\/5 Amplifier with Height (H), Width (W) and Depth (D) dimension labels\u003cbr\u003eHeight (H)\t1.93 in \/ 49 mm\u003cbr\u003eWidth (W)\t10.74 in \/ 273 mm\u003cbr\u003eDepth (D)\t                7.85 in \/ 199 mm\u003cbr\u003eNet Weight\t6.85 lb \/ 3.11 kg","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621070454,"sku":"010-03103-00","price":2067.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03103-00_TJNWRBR3XOAX.jpg?v=1757310826"},{"product_id":"jl-audio-mhd6004-24v-4-channel-marine-amplifier-24v-600-watts","title":"Jl Audio Mhd600\/4-24V 4 Channel Marine Amplifier 24V 600 Watts","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 Ω\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.\u003c\/p\u003e\u003cp\u003eWhen using the MHD750\/1 to drive a subwoofer system, the MHD600\/4 is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.\u003c\/p\u003e\u003cp\u003eThis marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.\u003c\/p\u003e\u003cdiv itemprop=\"title\" aria-expanded=\"true\" aria-controls=\"product-tab-rated-continuous-rms-power-14-4-v-content\" tabindex=\"0\"\u003e\u003cstrong\u003eRated Continuous (RMS) Power @ 14.4 V\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv aria-labelledby=\"product-tab-rated-continuous-rms-power-14-4-v\" itemprop=\"content\"\u003e\u003ctable border=\"1\" width=\"313\" height=\"140\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e@ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e150 W RMS x 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e@ 3 Ω\u003c\/td\u003e\n\u003ctd\u003e150 W RMS x 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e@ 2 Ω\u003c\/td\u003e\n\u003ctd\u003e150 W RMS x 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e@ 1.5 Ω\u003c\/td\u003e\n\u003ctd\u003e150 W RMS x 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged @ 8 Ω\u003c\/td\u003e\n\u003ctd\u003e300 W RMS x 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged @ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e300 W RMS x 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e6 Hz - 30 kHz (+0, -1dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio, referred to highest rated power\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio, referred to 1 W\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor @ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;300 \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor @ 2 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;150 \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N @ Rated Power\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.03% @ 4 Ω per Ch.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range @ RCA Inputs\u003c\/td\u003e\n\u003ctd\u003eSwitchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin.Copper Power \/ Ground Wire Gauge\u003c\/td\u003e\n\u003ctd\u003e4 AWG wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e50 A (AFS, AGU or MaxiFuse™)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cdiv itemprop=\"title\" aria-expanded=\"true\" aria-controls=\"product-tab-physical-specifications-content\" tabindex=\"0\"\u003e\u003cstrong\u003ePhysical Specifications\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv aria-labelledby=\"product-tab-physical-specifications\" itemprop=\"content\"\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/embed.widencdn.net\/svg\/jlaudio\/ehpc7r3xkh\/MHD600_4_Dimensions.svg?u=ndijqi\" alt=\"Lineart Top-View and Side-View of MHD600\/4 Amplifier with Height (H), Width (W) and Depth (D) dimension labels\"\u003e\u003c\/div\u003e\n\u003ctable border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (H)\u003c\/td\u003e\n\u003ctd\u003e1.93 in \/ 49 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (W)\u003c\/td\u003e\n\u003ctd\u003e10.74 in \/ 273 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth (D)\u003c\/td\u003e\n\u003ctd\u003e7.85 in \/ 199 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNet Weight\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621103222,"sku":"010-03104-00","price":1822.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03104-00_TJNWRG31TXZB.jpg?v=1757310833"},{"product_id":"jl-audio-mx2804-4-channel-full-range-amplifier-280-watts","title":"Jl Audio Mx280\/4 4 Channel Full Range Amplifier 280 Watts","description":"4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 O \/ 50 W x 4 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eEngineered specifically for powersports applications, the 4-channel MX280\/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.\u003cbr\u003e\u003cbr\u003eGenerating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280\/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.\u003cbr\u003e\u003cbr\u003eOther features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.\u003cbr\u003e\u003cbr\u003eThis amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t50 W RMS x 4\u003cbr\u003e@ 2 O\t70 W RMS x 4\u003cbr\u003eBridged @ 4O\t140 W RMS x 2\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t20 Hz - 20 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;60 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;30 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\tSwitchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t8 AWG wire\u003cbr\u003eFuse Rating\t35 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621135990,"sku":"010-03105-00","price":401.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03105-00_TJNWRKNCK5MU.jpg?v=1757310836"},{"product_id":"jl-audio-mx5004-4-channel-full-range-amplifier-500-watts","title":"Jl Audio Mx500\/4 4 Channel Full Range Amplifier 500 Watts","description":"4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 O \/ 70 W x 4 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eEngineered specifically for powersports applications, the 4-channel MX500\/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.\u003cbr\u003e\u003cbr\u003eGenerating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500\/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.\u003cbr\u003e\u003cbr\u003eOther features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.\u003cbr\u003e\u003cbr\u003eThis amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t70 W RMS x 4\u003cbr\u003e@ 2 O\t125 W RMS x 4\u003cbr\u003eBridged @ 4O\t250 W RMS x 2\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t20 Hz - 20 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;92 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;43 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\tSwitchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t50 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621463670,"sku":"010-03106-00","price":587.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03106-00_TJNWRQTTPJSP.jpg?v=1757310840"},{"product_id":"jl-audio-xdm10005-5-channel-car-and-marine-amplifier-1000-watts","title":"Jl Audio Xdm1000\/5 5 Channel Car And Marine Amplifier 1000 Watts","description":"The XDM1000\/5 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 O), while also generating a stout 600 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM1000\/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eThe XDM1000\/5 includes a 12 dB \/ octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 \u0026amp; 4, and a high-pass filter on Ch. 1 \u0026amp; 2. An \"x10\" multiplier switch on the Ch. 1 \u0026amp; 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003eMain Channels @ 4 O\t75 W RMS x 4\u003cbr\u003eMain Channels @ 2 O\t100 W RMS x 4\u003cbr\u003eMain Channels - Bridged @ 4O\t200 W RMS x 2\u003cbr\u003eSubwoofer Channel @ 4 O\t400 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 3 O\t500 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 2 O\t600 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 1.5 O\tN\/A\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response (Main Channels)\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eFrequency Response (Subwoofer Channel)\t10 Hz - 1 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power (Main Channels)\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power (Main Channels)\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eTHD+N @ Rated Power (Subwoofer Channels)\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t80 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621496438,"sku":"010-03113-00","price":1430.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03113-00_TJNWRZXAEFIX.jpg?v=1757310844"},{"product_id":"jl-audio-xdm2002-2-channel-class-d-full-range-car-and-marine-amplifier-200-watts","title":"Jl Audio Xdm200\/2 2 Channel Class D Full Range Car \u0026 Marine Amplifier 200 Watts","description":"2-Channel Class D Full-Range Car\/Marine Amplifier, 100 W x 2 @ 2 O \/ 75 W x 2 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe tiny XDM200\/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM200\/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eThe XDM200\/2 includes a 12 dB \/ octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t75 W RMS x 2\u003cbr\u003e@ 2 O\t100 W RMS x 2\u003cbr\u003eBridged @ 4O\t200 W RMS x 1\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS \u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t8 AWG wire\u003cbr\u003eFuse Rating\t20 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412621529206,"sku":"010-03114-00","price":578.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03114-00_TJNWS4KN1G0H.jpg?v=1757310847"},{"product_id":"jl-audio-xdm4004-4-channel-full-range-car-and-marine-amplifier-400-watts","title":"Jl Audio Xdm400\/4 4 Channel Full Range Car \u0026 Marine Amplifier 400 Watts","description":"4-Channel Class D Full-Range Car\/Marine Amplifier, 100 W x 4 @ 2 O \/ 75 W x 4 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe ultra-compact XDM400\/4 packs a serious full-range punch, generating a whopping 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM400\/4 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eCombine the XDM400\/4 with our XDM600\/1 monoblock to build a stunning 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat or deck. Or, use the XDM400\/4 by itself to power two satellites, plus a subwoofer. \u003cbr\u003e\u003cbr\u003eThe XDM400\/4 includes a 12 dB \/ octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the rear channels directly from the driver's seat or cockpit.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t75 W RMS x 4\u003cbr\u003e@ 2 O\t100 W RMS x 4\u003cbr\u003eBridged @ 4O\t200 W RMS x 2\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t40 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412623167606,"sku":"010-03115-00","price":715.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03115-00_TJNWS9RWP121.jpg?v=1757310849"},{"product_id":"jl-audio-xdm6001-monoblock-class-d-full-range-car-and-marine-amplifier-600-watts","title":"Jl Audio Xdm600\/1 Monoblock Class D Full Range Car \u0026 Marine Amplifier 600 Watts","description":"Monoblock Class D Car\/Marine Subwoofer Amplifier, 600 W x 1 @ 2 O \/ 400 W x 1 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThis potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM\/600\/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).\u003cbr\u003e\u003cbr\u003eDesigned for car or boat installations, the XDM600\/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eTargeted specifically for subwoofer applications, the XDM600\/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t400 W RMS x 1\u003cbr\u003e@ 3 O\t500 W RMS x 1\u003cbr\u003e@ 2 O\t600 W RMS x 1\u003cbr\u003e@ 1.5 O\tN\/A\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t7 Hz - 500 Hz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;1000 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;500 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t50 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412623200374,"sku":"010-03116-00","price":783.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03116-00_TJNWSETK46BH.jpg?v=1757310852"},{"product_id":"jl-audio-xdm6006-6-channel-class-d-full-range-car-and-marine-amplifier-600-watts","title":"Jl Audio Xdm600\/6 6 Channel Class D Full Range Car \u0026 Marine Amplifier 600 Watts","description":"6-Channel Class D Full-Range Car\/Marine Amplifier, 100 W x 6 @ 2 O \/ 75 W x 6 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe incredibly flexible XDM600\/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM600\/6 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eWith the XDM600\/6, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 O, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 O for your front satellites and 75 W x 2 @ 4 O for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.\u003cbr\u003e\u003cbr\u003eThe XDM600\/6 includes a 12 dB \/ octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t75 W RMS x 6\u003cbr\u003e@ 2 O\t100 W RMS x 6\u003cbr\u003eBridged @ 4O\t200 W RMS x 3\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t50 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412623233142,"sku":"010-03117-00","price":979.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03117-00_TJNWSJH9YR2B.jpg?v=1757310855"},{"product_id":"jl-audio-xdm7005-5-channel-class-d-full-range-car-and-marine-amplifier-700-watts","title":"Jl Audio Xdm700\/5 5 Channel Class D Full Range Car \u0026 Marine Amplifier 700 Watts","description":"5-Channel Class D Car\/Marine System Amplifier, 75 W x 4 @ 4 O + 300 W x 1 @ 2 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  \u003cbr\u003e\u003cbr\u003eThe XDM700\/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 O), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM700\/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eThe XDM700\/5 includes a 12 dB \/ octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 \u0026amp; 4, and a high-pass filter on Ch. 1 \u0026amp; 2. An \"x10\" multiplier switch on the Ch. 1 \u0026amp; 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003eMain Channels @ 4 O\t75 W RMS x 4\u003cbr\u003eMain Channels @ 2 O\t100 W RMS x 4\u003cbr\u003eMain Channels - Bridged @ 4O\t200 W RMS x 2\u003cbr\u003eSubwoofer Channel @ 4 O\t180 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 3 O\t240 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 2 O\t300 W RMS x 1\u003cbr\u003eSubwoofer Channel @ 1.5 O\tN\/A\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response (Main Channels)\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eFrequency Response (Subwoofer Channel)\t10 Hz - 1 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power (Main Channels)\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power (Main Channels)\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eTHD+N @ Rated Power (Subwoofer Channels)\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t60 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412623265910,"sku":"010-03118-00","price":1058.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03118-00_TJNWSO9V7927.jpg?v=1757310858"},{"product_id":"jl-audio-xdm8008-8-channel-class-d-full-range-car-and-marine-amplifier-800-watts","title":"Jl Audio Xdm800\/8 8 Channel Class D Full Range Car \u0026 Marine Amplifier 800 Watts","description":"8-Channel Class D Full-Range Car\/Marine Amplifier, 100 W x 8 @ 2 O \/ 75 W x 8 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe ultra-versatile XDM800\/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.\u003cbr\u003e\u003cbr\u003eSuitable for car or boat installations, the XDM800\/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eThe XDM800\/8 includes a 12 dB \/ octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.\u003cbr\u003e\u003cbr\u003eHere are a few examples of how the XDM800\/8 can be used:\u003cbr\u003e\u003cbr\u003eEight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8\u003cbr\u003eBig Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4O\u003cbr\u003eSix-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4O, plus two 4O subwoofers with 200 W each\u003cbr\u003eStaggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4O, plus four 4O speakers with 75 W each\u003cbr\u003eStaggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4O + rear speakers with 75 W x 2\u003cbr\u003eFour-Channel System Amp: drive left and right speakers with 200W x 2 @ 4O, plus two 4O subwoofers with 200W each\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t75 W RMS x 8\u003cbr\u003e@ 2 O\t100 W RMS x 8\u003cbr\u003eBridged @ 4O\t200 W RMS x 4\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t12 Hz - 22 kHz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;150 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;75 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t80 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412623462518,"sku":"010-03119-00","price":1332.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03119-00_TJNWSSXCYK4Z.jpg?v=1757310860"},{"product_id":"jl-audio-mmr-40-wired-remote-controller-with-lcd-display","title":"Jl Audio Mmr-40 Wired Remote Controller With Lcd Display","description":"Full-function, NMEA 2000® network wired remote controller with full color LCD display\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe MMR-40 is a NMEA 2000® Network Controller engineered to add full-function, auxiliary control to MediaMaster® source units.\u003cbr\u003e\u003cbr\u003eOutfitted with a NMEA 2000® Micro-C connector, the MMR-40 connects to a host MediaMaster® source unit in two ways:\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eDirect interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included)\u003cbr\u003eDirect connection of one MMR-40 with one host MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® network\u003cbr\u003eOnce connected, the MMR-40 automatically recognizes the host MediaMaster® source unit and will then mirror all host source unit controls and screen info onto the MMR-40's full-color, 2.8-inch LCD display, resulting in a complete MediaMaster® user experience.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe MMR-40 includes the following features:\u003cbr\u003eNMEA 2000® Certified (LEN 4)\u003cbr\u003eEasy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls\u003cbr\u003eIndependent day\/night display themes and lighting controls\u003cbr\u003eIP66 rated for real marine duty\u003cbr\u003eProtective Sun Cover included\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eOperating Temperature Range\t-4 F to +158 F (-20 C to +70 C)\u003cbr\u003eDisplay Size \/ Type\t2.8-inch \/ TFT LCD backlighted\u003cbr\u003eDisplay Resolution\t320 x 240","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412625068150,"sku":"010-03129-00","price":372.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03129-00_TJNWT0MMT4MM.jpg?v=1757310863"},{"product_id":"jl-audio-mmr-20-be-wired-remote-controller-for-mediamaster","title":"Jl Audio Mmr-20-Be Wired Remote Controller For Mediamaster","description":"Round, wired, non-display remote controller for use with MediaMaster®\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster® source units.\u003cbr\u003e\u003cbr\u003eBuilt for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster® source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster® source unit.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eA small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster® source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eMediaMaster® remote control capabilities include:\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003ePower On\/Off\u003cbr\u003eSource Select\u003cbr\u003eVolume Up\/Down\u003cbr\u003eTrack Up\/Down (USB \u0026amp; BT)\u003cbr\u003eTrack Fast-Forward\/Fast-Rewind (USB)\u003cbr\u003eFavorite Up\/Down (Radio)\u003cbr\u003ePlay\/Pause (USB \u0026amp; BT)\u003cbr\u003eMute\/Unmute (Radio \u0026amp; Aux)\u003cbr\u003e\u003cbr\u003eThe MMR-20-BE is compatible with these MediaMaster® source units:\u003cbr\u003eMM105\u003cbr\u003eMM100s-BE\u003cbr\u003eMM100s\u003cbr\u003eMM50\u003cbr\u003eNote: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412625133686,"sku":"010-03131-00","price":225.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03131-00_TJNWT7HJO160.jpg?v=1757310868"},{"product_id":"jl-audio-mm105-marine-entertainment-system-with-full-color-lcd-display","title":"Jl Audio Mm105 Marine Entertainment System With Full Color Lcd Display","description":"JL Audio MediaMaster - MM105\u003cbr\u003eWeatherproof (IP67 rated) design and construction to withstand the elements\u003cbr\u003eUltra-bright, easy-to-read, 3.5-inch full-color LCD display with individual settings for day\/night lighting and display themes\u003cbr\u003eLarge, easy-to-use backlit controls\u003cbr\u003eIntuitive interface with large text for easy legibility while in motion\u003cbr\u003eIndependent user settings for display brightness, button brightness and remote controller brightness (optional)\u003cbr\u003eComplete command of your marine listening experience with four zones of pristine audio\u003cbr\u003e\u003cbr\u003e12-channels of audiophile quality, 4V RMS preamp level outputs\u003cbr\u003eFour separate audio zones, each with independent feature\/control options:\u003cbr\u003eVolume: control all zones, or individual zones at anytime. A fixed output mode is also available.\u003cbr\u003eTone Controls: Bass, Midrange, Treble and Balance can be operated independently or linked with Zone 1\u003cbr\u003eSubwoofer outputs: each zone has its own subwoofer output, with a selectable low-pass crossover (Off\/60\/80\/100 Hz)\u003cbr\u003eAll zones can be named for ease of operation\u003cbr\u003eVolume Limit: set a maximum allowable volume level for each zone\u003cbr\u003eAll zones feature our zero-clipping audio circuit design, with self-limiting tone controls to prevent speaker system damage.\u003cbr\u003eBuilt for today’s modern media with multiple connectivity options\u003cbr\u003e\u003cbr\u003eBuilt-in tuners for Digital HD Radio™ (North America) and DAB+Radio (Europe). Services subject to local availability.\u003cbr\u003eGlobal, digital AM\/FM radio tuner with RDS (Radio Data System), to display extended FM program info, where available\u003cbr\u003eSiriusXM-Ready® (tuner, antenna, and subscription sold separately)\u003cbr\u003eStore up to 24 preferred stations\/channels, across different tuners\/bands\u003cbr\u003eBluetooth® audio streaming with Qualcomm® aptX™ for maximum audio fidelity with compatible devices\u003cbr\u003eUSB1 and USB2 direct-digital connections access music files on your compatible iPhone® or USB storage device; includes 2.1A and 500mA charging outputs\u003cbr\u003eAuxiliary inputs accepts analog audio signals from a variety of audio sources","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412625166454,"sku":"010-03132-00","price":1117.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03132-00_TJNWTBRBS8WD.jpg?v=1757310875"},{"product_id":"jl-audio-o-mm105-hr-mediamaster","title":"Jl Audio O-Mm105-Hr Mediamaster","description":"MediaMaster® 105-HR - Premium, Hidden Marine Source Unit\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eEngineered to operate behind the scenes as a hideaway receiver, the MediaMaster® 105-HR includes all features of the MM105, minus the LCD display and physical controls. This full-featured, concealed source unit delivers top-flight sound performance and advanced audio features specifically designed for marine applications. Outfitted with NMEA-2000® connectivity, the MM105-HR can be controlled by your Garmin, Lowrance, Raymarine or Simrad Multi-Function Display (MFD) or MMR-40 NMEA 2000® Network Controller (sold separately).\u003cbr\u003e\u003cbr\u003eBecause sound quality is our top priority, the MM105-HR is not equipped with an internal amplifier designed to drive loudspeakers directly. Instead, it offers twelve channels of audiophile-quality, preamp level outputs to deliver crystal-clear signals to high-quality marine amplifiers. These are deployed via four configurable, nameable audio zones, each with its own set of independent control options, making the MM105-HR adaptable to a wide range of system types. On-the-fly, level controls make adjusting each or all audio zones a breeze, while a useful volume limit feature ensures that nobody gets blasted inadvertently. All zones feature our Zero-Clipping audio circuit design, with self-limiting tone controls to keep the audio clean at high listening levels, reducing the likelihood of speaker damage.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eTwo Certified NMEA 2000® Control Options\u003cbr\u003e\u003cbr\u003eNMEA 2000® MFD Control - Use your compatible Multi-Function Display from Garmin, Simrad, Lowrance or Raymarine (refer to MFD manufacturer for compatibility info)\u003cbr\u003eMMR-40 NMEA 2000® Network Controller (sold separately) - Full-function, water-resistant (IP66 rated) controller with full-color LCD display\u003cbr\u003eComplete command of your marine listening experience:\u003cbr\u003e\u003cbr\u003e12-channels of audiophile quality, 4V RMS preamp level outputs\u003cbr\u003eFour separate audio zones, each with independent feature\/control options:\u003cbr\u003e- Volume: control all zones or individual zones, at any time. A fixed output mode is also available.\u003cbr\u003e- Tone Controls: Bass, Midrange, Treble and Balance can be operated independently or linked with Zone 1\u003cbr\u003e- Subwoofer Outputs: each zone has its own subwoofer output, with built-in, selectable low-pass crossover (Off\/60\/80\/100 Hz)\u003cbr\u003e- Customizable zone names for ease of operation\u003cbr\u003e- Volume Limit: set a maximum allowable volume level for each zone\u003cbr\u003eAll zones feature our zero-clipping audio circuit design, with self-limiting tone controls to prevent speaker system damage.\u003cbr\u003eBuilt for today's modern media with multiple connectivity options\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eInput Operating Voltage\t10 - 15.9 VDC\u003cbr\u003eStandby Current Draw\t120 mA\u003cbr\u003eOperating Current Draw\t1.5 A\u003cbr\u003eRecommended Fuse Value\t5 A\u003cbr\u003eRemote Turn-on Capacity\t500 mA (max)\u003cbr\u003eOperating Temperature Range\t-4 F to +158 F (-20 C to +70 C)\u003cbr\u003eOutput Channels\tOne stereo pair and mono subwoofer RCA plugs per zone\u003cbr\u003eOutput Zones\tRelative, Absolute, Fixed or Off\u003cbr\u003eMaximum Output Voltage\t4V RMS (Relative or Absolute), Selectable 4V\/2V\/1V RMS (Fixed)\u003cbr\u003e\u003cbr\u003eConnectivity\u003cbr\u003e Tuner\u003cbr\u003eFM Tuner with RDS\t87.5 MHz to 107.9 MHz (0.2 MHz step)\u003cbr\u003eAM Tuner\t530 kHz to 1710 kHz (10 kHz step)\u003cbr\u003eDAB+ Tuner\t170 MHz to 230 MHz\u003cbr\u003eFavorites\t24 presets across all tuners\u003cbr\u003e Bluetooth®\u003cbr\u003eProfile\tA2DP v1.2, AVRCP v1.4\u003cbr\u003eCore Specification\tVersion 2.1 + EDR\u003cbr\u003eCodec\tSBC, Qualcomm® aptX™ audio\u003cbr\u003eConnection Range\tUp to 35 ft \/ 11 m\u003cbr\u003e USB\u003cbr\u003eInterface\tUSB 2.0 host\u003cbr\u003eMaximum Current Output\tUSB1: 1 A \/ USB2: 500 mA\u003cbr\u003eSupported Audio Formats\tMP3, MP4, WAV, AAC, M4A, M4B\u003cbr\u003eApple Compatibility\tiPhone 5 or beyond (functionality contingent upon compatible iOS release)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412625231990,"sku":"010-03133-00","price":1224.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03133-00_TJNWTGA4QYIT.jpg?v=1757310877"},{"product_id":"jl-audio-mmr-5n2k-wired-remote-controller-for-mediamaster","title":"Jl Audio Mmr-5N2K Wired Remote Controller For Mediamaster","description":"MediaMaster® NMEA 2000® network wired remote volume controller\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe MMR-5N2K is a wired remote designed to add auxiliary volume control to compatible MediaMaster® source units.\u003cbr\u003e\u003cbr\u003eOutfitted with a NMEA 2000® Micro-C connector, the MMR-5N2K connects to a host MediaMaster® source unit in two ways:\u003cbr\u003e\u003cbr\u003eDirect interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included)\u003cbr\u003eDirect connection to single MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® network\u003cbr\u003eEngineered for real-world marine (and many outdoor) applications, its weatherproof (IPX7 rated) design is built to withstand the harshest environments.\u003cbr\u003e\u003cbr\u003eThe MMR-5N2K includes the following features: \u003cbr\u003e\u003cbr\u003eNMEA 2000® Certified (LEN 2)\u003cbr\u003eWeatherproof design (IPX7 rated) for real marine duty\u003cbr\u003eLarge rotary design for easy adjustments, especially while in motion\u003cbr\u003eOne knob simultaneously adjusts all audio zones \u003cbr\u003eSimple, push-button audio mute\/unmute control\u003cbr\u003eIntegrated status LED ring with programmable brightness\u003cbr\u003eFront-mounted design requires just a single 1.5-inch (38 mm) hole for installation\u003cbr\u003eAutomatically recognizes which MediaMaster® source unit model is connected\u003cbr\u003eThe MMR-5N2K is compatible with these MediaMaster® source units:\u003cbr\u003e\u003cbr\u003eMM105\u003cbr\u003eMM100s-BE\u003cbr\u003eMM100s\u003cbr\u003eMM80-HR\u003cbr\u003eMM50\u003cbr\u003eNote: The MMR-5N2K should only be used with a single MediaMaster® source unit, connected via a NMEA 2000® network or MMC-PN2K powered network cables (sold separately). The level control mode for each audio zone of the host source unit must be set to Relative or Variable. When connected, all audio zones will adjust simultaneously. Functionality of the MMR-5N2K is solely derived from the host MediaMaster® source unit.","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412625952886,"sku":"010-03134-00","price":293.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03134-00_TJNWTMAF10WY.jpg?v=1757310882"},{"product_id":"jl-audio-mma-1-html-mfd-data-interface-for-mediamaster","title":"Jl Audio Mma-1-Html Mfd Data Interface For Mediamaster","description":"NMEA 2000® Network, MFD Data Interface for MediaMaster® MM105 \u0026amp; MM105-HR\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe MMA-1-HTML is a NMEA 2000® certified data interface engineered to generate MediaMaster® themed UI navigation and controls directly onto your vessel's compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster® source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster® seamlessly, via your helm's MFD display.\u003cbr\u003e\u003cbr\u003eOutfitted with a NMEA 2000® Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster® source unit and will then project its familiar screen info and navigation controls onto your MFD's display, resulting in a true MediaMaster® user experience.\u003cbr\u003e\u003cbr\u003eCompatible source unit models: MM105, MM105-HR, MM55, MM55-HR\u003cbr\u003e\u003cbr\u003eNote: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000® network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000® network.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003eOperating Voltage\t14.4V DC (10V – 15.9V)\u003cbr\u003eOperating Temp Range\t-4 F to +149 F (-20 C to +65 C)\u003cbr\u003eCurrent Draw \/ Fuse Value\t150 mA (max) \/ 1 A\u003cbr\u003eNMEA 2000® LEN\t1 (Micro-C connector)\u003cbr\u003eCompatible MFDs*\tSimrad, B\u0026amp;G, Lowrance, Garmin\u003cbr\u003eDimensions\t6.77 in. x 3.98 in. x 1.73 in.\u003cbr\u003e(172 mm x 101 mm x 44 mm","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412628607094,"sku":"010-03135-00","price":842.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03135-00_TJNWTSA62CAX.jpg?v=1757310886"},{"product_id":"jl-audio-m3-650x-s-gm-i-65-marine-coaxial-speakers-gray-metallic-sport-grille","title":"Jl Audio M3-650X-S-Gm-I 6.5\" Marine Coaxial Speakers Gray Metallic Sport Grille","description":"M3 Standard Flange 6.5-inch Marine Coaxial System (60 W, 4 O) - Gray Metallic Sport Grille with RGB LED Illumination\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.\u003cbr\u003e\u003cbr\u003eThe long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eIntegrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eAlthough M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t60 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 120 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412642304118,"sku":"010-03062-00","price":440.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03062-00_TJNWNTCS9AZC.jpg?v=1757310891"},{"product_id":"jl-audio-m3-650x-s-gw-i-65-marine-coaxial-speakers-gloss-white-sport-grille-wi","title":"Jl Audio M3-650X-S-Gw-I 6.5\" Marine Coaxial Speakers Gloss White Sport Grille Wi","description":"M3 Standard Flange 6.5-inch Marine Coaxial System (60 W, 4 O) - Gloss White Sport Grille with RGB LED Illumination\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe M3-650X 6.5-inch coaxial speaker is designed around the standard marine 6.5-inch speaker format and features a wide mounting flange with a six hole mounting pattern.\u003cbr\u003e\u003cbr\u003eThe long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eIntegrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eAlthough M3-650X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t60 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 120 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412642664566,"sku":"010-03064-00","price":440.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03064-00_TJNWO0OFPL2H.jpg?v=1757310895"},{"product_id":"jl-audio-m3-770x-s-gm-i-77-marine-coaxial-speakers-gray-metallic-sport-grille","title":"Jl Audio M3-770X-S-Gm-I 7.7\" Marine Coaxial Speakers Gray Metallic Sport Grille","description":"M3 7.7-inch Marine Coaxial Speakers (70 W, 4 O) - Gray Metallic Sport Classic Grille with RGB LED Illumination\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.\u003cbr\u003e\u003cbr\u003eThe woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eIntegrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eAlthough M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t70 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 140 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412642893942,"sku":"010-03067-00","price":587.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03067-00_TJNWOC1DTXFA.jpg?v=1757310897"},{"product_id":"jl-audio-m3-770x-s-gw-i-77-marine-coaxial-speakers-gloss-white-sport-grille-wi","title":"Jl Audio M3-770X-S-Gw-I 7.7\" Marine Coaxial Speakers Gloss White Sport Grille Wi","description":"M3 7.7-inch Marine Coaxial Speakers (70 W, 4 O) - Gloss White Sport Grille with RGB LED Illumination\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M3 coaxial systems deliver excellent performance at a more affordable price than our maximum-performance M6 models.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M3-770X results in increased efficiency (more output for a given amount of power). This gives them the ability to play louder and cleaner at high volumes than smaller speakers.\u003cbr\u003e\u003cbr\u003eThe woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 0.75-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.\u003cbr\u003e\u003cbr\u003eIntegrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eAlthough M3-770X Coaxial Systems can be used with as little as 20 W per channel, for best audio performance we recommend amplifiers capable of between 75-100 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t70 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t20 - 140 W \/ Ch.\u003cbr\u003eSystem Efficiency\t90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412645843062,"sku":"010-03069-00","price":587.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03069-00_TJNWOHZ5GMJ3.jpg?v=1757310899"},{"product_id":"jl-audio-m6-770x-s-gwgw-77-marine-coaxial-speakers-gloss-white-with-titanium-s","title":"Jl Audio M6-770X-S-Gwgw 7.7\" Marine Coaxial Speakers Gloss White With Titanium S","description":"M6 7.7-inch Marine Coaxial Speakers (100 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.\u003cbr\u003e\u003cbr\u003eA 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t100 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t40 - 200 W \/ Ch.\u003cbr\u003eSystem Efficiency\t91.0 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412645974134,"sku":"010-03073-00","price":783.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03073-00_TJNWOXYYZRPU.jpg?v=1757310902"},{"product_id":"jl-audio-m6-770x-s-gwgw-i-77-marine-coaxial-speakers-gloss-white-with-led-and","title":"Jl Audio M6-770X-S-Gwgw-I 7.7\" Marine Coaxial Speakers Gloss White With Led And","description":"M6 7.7-inch Marine Coaxial Speakers with Transflective™ LED Lighting (100 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting.\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed. The woofer element is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t100 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t40 - 200 W \/ Ch.\u003cbr\u003eSystem Efficiency\t91.0 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t45 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646072438,"sku":"010-03074-00","price":881.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03074-00_TJNWP01S335C.jpg?v=1757310906"},{"product_id":"jl-audio-m6-770x-s-gmti-i-77-marine-coaxial-speakers-gray-titanium-sport-grill","title":"Jl Audio M6-770X-S-Gmti-I 7.7\" Marine Coaxial Speakers Gray Titanium Sport Grill","description":"\u003cp\u003eM6 7.7-inch Marine Coaxial Speakers with Transflective™ LED Lighting for Infinite-Baffle Use (100 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOrdered upon demand\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting..\u003cbr\u003e\u003cbr\u003eThe oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed. The woofer element is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 57 l). Operating this coaxial system in less space will compromise its low frequency performance.\u003cbr\u003e\u003cbr\u003eA 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS) 100 W\u003cbr\u003eRecommended Amplifier Power (RMS) 40 - 200 W \/ Ch.\u003cbr\u003eSystem Efficiency 91.0 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance 4 O\u003cbr\u003eSystem Frequency Response 45 Hz - 25 KHz ± 3 dB\u003c\/p\u003e","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646170742,"sku":"010-03076-00","price":881.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03076-00_TJNWP9AHTCQ4.jpg?v=1757310910"},{"product_id":"jl-audio-m6-8ib-s-gwgw-i-4-8-marine-subwooder-driver-gloss-white-titanium-sport","title":"Jl Audio M6-8Ib-S-Gwgw-I-4 8\" Marine Subwooder Driver Gloss White Titanium Sport","description":"M6 8-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (200 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system. This model also features the added visual impact of JL Audio’s Transflective™ RGB LED lighting, a patent-pending technology that emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eThe M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. \/ 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t200 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646465654,"sku":"010-03081-00","price":480.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03081-00_TJNWPSUE04YP.jpg?v=1757310918"},{"product_id":"jl-audio-m6-8ib-s-gmti-i-4-8-marine-subwooder-driver-gray-titanium-sport-grille","title":"Jl Audio M6-8Ib-S-Gmti-I-4 8\" Marine Subwooder Driver Gray Titanium Sport Grille","description":"M6 8-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (200 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system. This model also features the added visual impact of JL Audio’s Transflective™ RGB LED lighting, a patent-pending technology that emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eThe M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. \/ 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t200 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646662262,"sku":"010-03082-00","price":480.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03082-00_TJNWPVD159EL.jpg?v=1757310923"},{"product_id":"jl-audio-m6-10ib-s-gwgw-i-4-10-marine-subwooder-driver-gloss-white-sport-grille","title":"Jl Audio M6-10Ib-S-Gwgw-I-4 10\" Marine Subwooder Driver Gloss White Sport Grille","description":"M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.\u003cbr\u003e\u003cbr\u003eThe M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t250 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646793334,"sku":"010-03085-00","price":627.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03085-00_TJNWQBBHTNHI.jpg?v=1757310928"},{"product_id":"jl-audio-m6-10ib-s-gmti-4-10-marine-subwooder-driver-gray-metallic-titanium-spo","title":"Jl Audio M6-10Ib-S-Gmti-4 10\" Marine Subwooder Driver Gray Metallic Titanium Spo","description":"M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.\u003cbr\u003e\u003cbr\u003eThe M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003cbr\u003e\u003cbr\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold individually.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t250 W\u003cbr\u003eNominal Impedance (Znom)\t4 O","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412646924406,"sku":"010-03086-00","price":568.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03086-00_TJNWQEHZPR1P.jpg?v=1757310932"},{"product_id":"jl-audio-m6-10ib-s-gmti-i-4-10-marine-subwoofer-driver-with-led-titanium-sport","title":"Jl Audio M6-10Ib-S-Gmti-I-4 10\" Marine Subwoofer Driver With Led Titanium Sport","description":"\u003cp\u003eJl Audio M6-10Ib-S-Gmti-I-4 10\" Marine Subwoofer Driver With Led Titanium Sport Grille\u003c\/p\u003e\r\n\u003cp\u003eM6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003eWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.\u003c\/p\u003e\r\n\u003cp\u003ePurpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.\u003c\/p\u003e\r\n\u003cp\u003eThe M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. \/ 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.\u003c\/p\u003e\r\n\u003cp\u003eLike all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.\u003c\/p\u003e\r\n\u003cp\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003c\/p\u003e\r\n\u003cp\u003eSold individually.\u003c\/p\u003e\r\n\u003cp\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS): 250 W\u003cbr\u003eNominal Impedance (Znom): 4 O\u003c\/p\u003e\r\n\u003cp\u003ePhysical Specifications:\u003cbr\u003eNominal Diameter 10.0 in \/ 250 mm\u003cbr\u003eOverall Diameter (A) 10.75 in \/ 273 mm\u003cbr\u003eBolt Hole Circle Diameter (B) 9.70 in \/ 247 mm\u003cbr\u003eFrontal Grilles Protrusion* (C) 1.66 in \/ 42 mm\u003cbr\u003eMounting Hole Diameter (D) 8.875 in \/ 225 mm\u003cbr\u003eMounting Depth (E) 5.90 in \/ 150 mm\u003cbr\u003eDriver Displacement 0.052 cu ft \/ 1.47 L\u003cbr\u003eNet Weight 12.60 lb \/ 5.70 kg\u003c\/p\u003e","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412650561654,"sku":"010-03087-00","price":627.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03087-00_TJNWQHE6MK4R.jpg?v=1757310936"},{"product_id":"jl-audio-m6-650x-s-gmti-i-65-marine-coaxial-speakers-gray-titanium-sport-grill","title":"Jl Audio M6-650X-S-Gmti-I 6.5\" Marine Coaxial Speakers Gray Titanium Sport Grill","description":"M6 6.5-inch Marine Coaxial Speakers with Transflective™ LED Lighting (75 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting.\u003cbr\u003e\u003cbr\u003eA DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.\u003cbr\u003e\u003cbr\u003eA 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t75 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t25 - 150 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412650856566,"sku":"010-03092-00","price":731.03,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03092-00_TJNWQVPKA9M9.jpg?v=1757310940"},{"product_id":"jl-audio-m6-650x-s-gwgw-i-65-marine-coaxial-speakers-gloss-white-sports-grille","title":"Jl Audio M6-650X-S-Gwgw-I 6.5\" Marine Coaxial Speakers Gloss White Sports Grille","description":"M6 6.5-inch Marine Coaxial Speakers with Transflective™ LED Lighting (75 W, 4 O) - Gloss White Trim Ring, Gloss White Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting.\u003cbr\u003e\u003cbr\u003eA DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.\u003cbr\u003e\u003cbr\u003eA 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.\u003cbr\u003e\u003cbr\u003eA multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eContinuous Power Handling (RMS)\t75 W\u003cbr\u003eRecommended Amplifier Power (RMS)\t25 - 150 W \/ Ch.\u003cbr\u003eSystem Efficiency\t89.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance\t4 O\u003cbr\u003eSystem Frequency Response\t55 Hz - 25 KHz ± 3 dB","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412651282550,"sku":"010-03093-00","price":764.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03093-00_TJNWQY2C3RGU.jpg?v=1757310943"},{"product_id":"jl-audio-m6-88x-s-gmti-i-88-marine-coaxial-speakers-with-led-and-titanium-spor","title":"Jl Audio M6-88X-S-Gmti-I 8.8\" Marine Coaxial Speakers With Led And Titanium Spor","description":"M6 8.8-inch Marine Coaxial Speakers with Transflective™ LED Lighting (125 W, 4 O) - Gray Metallic Trim Ring, Titanium Sport Grille\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials, with the added visual impact of our patent-pending, Transflective™ RGB LED lighting.\u003cbr\u003e\u003cbr\u003eThese 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.\u003cbr\u003e\u003cbr\u003eTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.\u003cbr\u003e\u003cbr\u003eAlthough M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.\u003cbr\u003e\u003cbr\u003eProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003eSpecifications: \u003cbr\u003eContinuous Power Handling (RMS):       125 W\u003cbr\u003eRecommended Amplifier Power (RMS):  50 - 250 W \/ Ch.\u003cbr\u003eSystem Efficiency:                                  90.5 dB @ 1 W \/ 1 m\u003cbr\u003eSystem Nominal Impedance:                  4 O\u003cbr\u003eSystem Frequency Response:               38 Hz - 20 KHz ± 3 dB\u003cbr\u003e\u003cbr\u003ePhysical Specs:\u003cbr\u003eFrame Outer Diameter (A):      8.80 in \/ 224 mm\u003cbr\u003eBolt Hole Circle Diameter (B):   7.97 in \/ 202 mm\u003cbr\u003eFrontal Grille Protrusion* (C):  1.45 in \/ 37 mm\u003cbr\u003eMounting Hole Diameter (D):    7.375 in \/ 187 mm\u003cbr\u003eMounting Depth (E):                 5.00 in \/ 127 mm\u003cbr\u003e*Frontal grille protrusion measured from mounting surface","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412651511926,"sku":"010-03099-00","price":1048.55,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03099-00_TJNWR9HC29BP.jpg?v=1757310948"},{"product_id":"jl-audio-xdm10001-monoblock-class-d-full-range-car-and-marine-amplifier-1000-watt","title":"Jl Audio Xdm1000\/1 Monoblock Class D Full Range Car \u0026 Marine Amplifier 1000 Watt","description":"Monoblock Class D Car\/Marine Subwoofer Amplifier, 1000 W x 1 @ 2 O \/ 600 W x 1 @ 4 O - 14.4V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThis monoblock subwoofer powerhouse employs our high-speed NexD™ switching technology to achieve unprecedented efficiency and amazing power output from a very compact chassis. The XDM1000\/1 generates up to 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.\u003cbr\u003e\u003cbr\u003eDesigned for car or boat installations, the XDM1000\/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.\u003cbr\u003e\u003cbr\u003eIntended specifically for subwoofer applications, the XDM1000\/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB\/oct.). With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.\u003cbr\u003e\u003cbr\u003eFinished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.\u003cbr\u003e\u003cbr\u003eRated Continuous (RMS) Power @ 14.4 V\u003cbr\u003e@ 4 O\t600 W RMS x 1\u003cbr\u003e@ 3 O\t800 W RMS x 1\u003cbr\u003e@ 2 O\t1000 W RMS x 1\u003cbr\u003e@ 1.5 O\tN\/A\u003cbr\u003e\u003cbr\u003eGeneral Specifications\u003cbr\u003eFrequency Response\t7 Hz - 500 Hz (+0, -1dB)\u003cbr\u003eS\/N Ratio, referred to highest rated power\t\u0026gt;83 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eS\/N Ratio, referred to 1 W\t\u0026gt;53 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)\u003cbr\u003eDamping Factor @ 4 O\t\u0026gt;1000 \/ 50 Hz\u003cbr\u003eDamping Factor @ 2 O\t\u0026gt;500 \/ 50 Hz\u003cbr\u003eTHD+N @ Rated Power\t\u0026lt;1% @ 2 O per Ch.\u003cbr\u003eInput Voltage Range @ RCA Inputs\t200 mV - 4 V RMS\u003cbr\u003eMin.Copper Power \/ Ground Wire Gauge\t4 AWG wire\u003cbr\u003eFuse Rating\t80 A (AFS, AGU or MaxiFuse™)","brand":"JL AUDIO","offers":[{"title":"Default","offer_id":42412651610230,"sku":"010-03112-00","price":1068.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0169\/1506\/files\/010-03112-00_TJNWRYCLW1IS.jpg?v=1757310951"}],"url":"https:\/\/www.lx2001.co.nz\/collections\/jl-audio.oembed","provider":"LX2001 - Homewares, Outdoor, Phone Accessories, Cases, Speakers, Headphones + More","version":"1.0","type":"link"}